What Is the Difference Between A Single and Double Bevel Miter Saw?

Since the introduction of miter saws in the early 1970s, it has retained its seat as a must-have tool in any woodwork settings. The power tool is handy in making quick angled, straight, and sloped (beveled) cuts on stock. 

The manufacturers have improved how the meter saws operate to give satisfying results to users. Both the single and double bevel miter saws make straight, angled and beveled cuts. In this article, we will elaborate on the difference between the single and double bevel meter saws. 

The difference can best be explained from the operations point of view. The single and double bevel miter saws both make angled cuts on the face of a piece. That means you set the angle on the face of the part, which is always less than 90 degrees, and plunge into the material. 

So, where is the difference between a Single and double bevel miter saw

The difference is on how the blade spins on each set of saws. The single bevel miter saw can only cut on one side of the material. It could either be on the left or the right side. On the other hand, the double bevel miter saw’s blade will rotate and make cuts on both the right and on the left side of the material.

https://youtu.be/MFekgnjdw7o

Which bevel miter saw do you choose?

From the above point of operations, it’s easy to deduce which tool is more suited for your needs. 

When working with the single bevel miter saw, after making the first slanted cut, you will have to flip the stock over to the other side for a similar reduction. This movement will have some ramifications. First, you will consume more time in moving the inventory over and over again. Still, changes and settings will affect the cutting accuracy. However, with the double bevel miter saw, you just tilt the blade without moving the stock and making a similar bevel cut. With this saw, you save time and make very accurate and the same edges. The double bevel miter saw is the tool of choice for large projects and professionals despite its share of shortcomings. The added features make its operations more complicated for beginners. Besides, it’s more expensive compared to the single bevel miter saw. On the other hand, the single bevel miter saws are cheaper, easy to use even by beginners. It is handy for small tasks with no deadlines.

 

Sliding Versus Non-Sliding Miter Saw

Miter saws can further be categorized into sliding or non-sliding miter saws. 

What Factors Keep These Tools Apart?

From the name sliding, it means the saw is covering an extended distance. The saw has added rails that allow you to move the head back and forth as you cut. This feature allows the saw to cut larger board sizes of up to 12 inches.

The non-sliding miter saw as the name suggest a stationary cutting tool. It makes cross cuts, bevel, compound, and angled cuts. The size of it’s blade limits its cutting length. The non-sliding saw can cut up to 6 inches. This length is satisfactory for cutting most trim boards that measure 4 inches.

 Do You Choose a Single and double bevel miter saw?

Choosing the right tool will depend on the projects that you are covering. When making window trims, frames, or various crown moldings, the non-sliding miter saw is recommended. They will make quick 45 degrees cuts that are suitable for products that require joining together. Besides, the short cutting distance gives more freedom in cutting other shapes apart from straight cuts. However, when you need more complex cuts, the sliding miter saw will carry the day.

The extended cutting distance increases the rate of work covered in a short period. Besides, it cuts longer pieces without the need to flip over from time to time. It’s a handy tool when making massive precise cuts. However, it is bulky and heavy, making it less portable for off-site jobs. On cost implications, the sliding saw is quite expensive compared with the non-sliding.

Final Thoughts

After careful considerations, what matters most is the project that is before you. However, some factors like cost and the tool that will cover more jobs are top priorities. For beginners, it’s advisable to purchase the cheaper and portable non-sliding miter saw. This tool will be perfect before you move on to the complex sliding miter saw’s jobs. 

What Does Double Bevel Mean on A Miter Saw?

The double bevel on a meter saw means that the power tool has an adjustable blade that allows you to make an angled cut on the face of the board and just flips over to the other side for a similar cut. The essence of having the double bevel is that you make a cut on the board and slide it down then spin the blade for the corresponding reduction. The double bevel saw is handy when making intricate cuts on crown boards, braces, and furniture legs. The power tool assures you of accuracy on these cuts. Precision ensures that the pieces fit in when it comes to assembling.

How Do You Identify the Double Bevel Meter Saw?

There is a high chance that you may not locate the double bevel saw in an assembly of miter saws. However, it’s easily identified by the “V” shaped cutout that is designed to allow for the low angle cuts on both sides. The single bevel saw will have a small angle cutout on the left side only.

What Is the Difference Between the Single Bevel and Double Bevel Broadhead?

Welcome to the world of wild hunting!

For lovers of game hunting, the hunting gear is of paramount importance. Besides the hunter being ready and tough for the hunting scene, you need a ready to pierce spear. The broadhead is the most important part of the spear. It is attached to the shaft of the hunting spear with the sole reason of penetrating the animal to make a kill.

The broadhead could either be single beveled or double beveled.

What Is A Single Beveled Broadhead?

The single beveled broadhead is the penetrating part of a spear that inclines relation to the adjacent surface. That means the surface is not at the right angle in comparison to the other surface. Succinctly, it can be sharpened on one side only.

What Is A Double Beveled Broadhead?

In the double-beveled branded, the cutting surface is inclined on both sides. Succinctly, it can be sharpened on both sides.

Why Choose the Single Beveled Broadhead Over the Double-Beveled Broadhead?

When you fire a spear, both the single and double beveled broadhead will travel at similar speed and accuracy. The difference starts when either comes into contact with the animal’s bone. The double-beveled broadhead will pierce and force its way through the bone with a dead end. However, with the single beveled broadhead, the action does not end there. The inclined side tends to cause a torque (rotation like force) that increases the penetration power. The increased power causes massive bone splitting with the effective killing of the animal.

How does the torque (rotation) come about?

The single bevel is the reason for this rotation. When the broadhead penetrates the flesh, the pressure exerted on the unbeveled side pushes against the tissue. The muscle exerts equal opposing pressure forcing the broadhead’s beveled edge to rotate.

What Is A Bevel Cut?

A bevel cut is when you cut through the edge of a board at a lesser angle than 90 degrees. Usually, the boards are squared with the edges running at 90 degrees. If you cut this edge at any angle, then you are making a bevel cut. It can also be termed as a cut on the face of the board. The reason for this term is that when you make the cut, it will appear as if a part of the face has been slashed off. 

Bevel cuts make furniture look more elegant when introduced on picture frames, cabinet trims, and interior moldings. Besides, they give additional support for welding and increase the surface area on edge for more stability. A bevel cut will join two pieces making them appear as one. The joint is completely concealed for aesthetic purposes in areas where a joint would appear undesirable.

Single Bevel Versus Double Bevel Knife

Let’s briefly visit the chef’s world where we compare the single and double-beveled knives.

The single bevel knife has one of its edges grounded with the other side lying flat. The angle of the grounded side ranges from 15 to 25 degrees. This range gives a wide area of choice for various applications.

The double bevel knife has both sides grounded, forming ‘V’ shapes at the meeting point. This shape makes it more resistant to cracking and rolling. It’s smaller in size and more popular in homes.

Why Choose the Double Bevel Over the Single Bevel?

The double bevel knife is for a general user who doesn’t need a specialized cutting knife. It requires no special skills making it useful for the common chores like cutting vegetables, fruits, and so forth. On the other hand, the beveled knife has more accurate and easier cuts on tough materials. This handy advantage arises when all the cutting force is exerted on one side of the blade. Besides, it has cleaner cuts and is easier to sharpen. The professional chefs prefer this beveled knife despite its high cost as compared with the double-beveled knife.

Why do you need a dual bevel miter saw?

A dual bevel meter saw has a blade that rotates to cut on both sides of the material. This feature gives the woodworker some advantages.

  1. Speed

Working with a dual bevel reduces the time taken in cutting a huge pile of boards. It is a tool of choice for large construction sites and in big projects.

  1. Accuracy

 Precision is maintained with the same settings for all your cuts. You just tilt the blade and reposition the material for the corresponding cut.

  1. Easier operations

Rotating the material after every cut is very tiring. The double bevel saw alleviates this problem by just rotating the blade for the next cut.

Conclusion

Purchasing a Single and double bevel miter saw has never been easy, especially for beginners and DIYs who have little or no knowledge about miter saws. However, with this article, you now know the difference between single and double bevel miter saws, which makes it easy for you to purchase the saw you require. If you need more information on miter saws, click here.

 

 

 

 

 

 

 

Tom

I am a woodwork enthusiast who is in the Financial Industry. I come from a woodworking family and started handling woodwork tools from a young age. For me, it's not a hobby. its a way of life.

Recent Posts